Online Videos

TrueMill IMTS 2010 Demo

Demo cutting 4140 alloy from the Hardinge booth at IMTS 2010. 

.5" RampMill from SwiftCarb
Lyndex-Nikken Holder
Blaser coolant

Depth: 1.00"
Speed: 7500 rpm
Feed: 475 ipm
Max Stepover: .039
Tool Engagement Angle: 32.5 degrees
MRR (Material Removal Rate): 18.6 in3/min

Ti6Al4V - Okuma
MB-46VAE

Cutting 9 cubic inches per minute on an Okuma.

TRUEMill - Aluminum 5083 - Haas VF-2SS